India Trade Company

Description

GST I-9105R Intelligent Reflective Beam detector (the detector) is an addressable reflective infrared beam smoke detector that has two signal output ways: loop output and contact output. When the detector is connected with GST fire alarm control panel directly, state information will be transmitted through loop between the detector and the control panel. The detector can be programmed by GST programmer. Code range is within 1~242. When the detector is not connected with the control panel, fire and fault information can be transmitted by contacts. The detector must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector.

Description

The RE-428 Series beam smoke detector is designed for smoke detection at the start of a fire. It is especially suitable for protection of indoor spaces, in which the appearance of smoke is likely during ignition of a fire, and where, due to a large space area, installation of a greater number of point smoke detectors would be necessary. The RE-428 Series beam smoke detector and the prism reflector or reflector panel are installed on opposite walls of a room.
User Friendly Installation

Key Features 

• In built laser light for easy alignment
• Supports 5 to 50 meter range
• Option for Remote Indication
• Adjusting Screws at detector for precise alignment
• Infrared transmitter & receiver located in a single housing
• In built drift compensation for monitoring dirt build up on the optical system
• Sensitivity Threshold :- 18% ,30%, 50%.